Teltonika Rail PoE+ Switch TSW100 5 Port
- VendorTeltonika
Description
Teltonika Rail PoE+ Switch TSW100 5 Port
Industrial unmanaged PoE+ switch
The TSW100 is Teltonika Networks' first industrial unmanaged switch. Equipped with five Gigabit Ethernet ports, four of which support the IEEE 802.3af and IEEE 802.3at Power over Ethernet (PoE) standards. Classified as Power Source Equipment (PSE), it enables centralized power supply, delivers up to 30 watts per port, and reduces the effort required to install the power supply. It features 10/100/1000 Mbps Ethernet ports for a cost-effective, high-bandwidth solution. Ideal for professional high-bandwidth applications, providing both reliable data connections and the required power supply.
Power over Ethernet (PoE)
With Power over Ethernet, you can power compatible devices via the network cable. This reduces cabling effort, especially for end devices such as wireless access points, IP phones, and IP cameras, while also allowing greater flexibility when placing the devices.
802.3at PoE+
The IEEE 802.3at standard provides a maximum of 25.4 watts of power on each PoE+ port at a voltage of up to 50 volts. The standard assumes that 21.90 watts of usable power remain or may be consumed after line losses, so that the maximum power output is not exceeded. For PoE+, a Cat5e/6 cable with a maximum length of 100 m is recommended.
Specifications
- Montage Switch:
- Desktop, DIN-Rail, Wand
- Luftfeuchtigkeit im Betrieb:
- 10 - 90 %
- Unterstützte Netzteile:
- 1
- Netzteil Eigenschaften:
- Extern
- Netzteil Nennleistung:
- 65 W
- PoE Budget:
- 120 W
- Max. Leistung PoE pro Port:
- 30 W
- Eingangsstrom:
- DC (Gleichstrom)
- SFP Geschwindigkeit:
- Keine SFP Ports
- SFP Anschlüsse:
- 0
- SFP+ Anschlüsse:
- 0
- QSFP+ Anschlüsse:
- 0
- SFP28 Anschlüsse:
- 0
- QSFP28 Anschlüsse:
- 0
- RJ-45 Anschlüsse:
- 5
- RJ-45 Geschwindigkeit:
- 10/100/1000 Mbit/s
- Anzahl PoE Ports:
- 4
- PoE Standard:
- 802.3af/at Class 4 Type 2 PoE+ 30 Watt
- Anzahl Combo Ports:
- 0
- Switch-Ebene:
- L2 (Layer 2)
- Switch Management:
- Unmanaged
- Link Aggregation:
- Nein
- Zusatzfunktionen:
- Lüfterlos, Metallgehäuse
- IGMP Snooping:
- Nein
- Anzahl Netzteile vorinstalliert:
- 1
- Jumbo Frames:
- Ja
- Switch Konfiguration:
- Nein
- Betriebstemperatur min.:
- -40 °C
- Betriebstemperatur max.:
- 75 °C
- Switching Kapazität:
- 10 Gbit/s
- Geräuschentwicklung in Betrieb:
- 0 dBA
- Leistungsaufnahme Betrieb:
- 9 W
- Anzahl VLAN:
- 0
- Anzahl nutzbarer Ports:
- 5
- Tiefe:
- 95 mm
- Breite:
- 115 mm
- Höhe:
- 32 mm
- Stackable:
- Nein
Teltonika Rail PoE+ Switch TSW100 5 Port
- VendorTeltonika
66.10
Ports: 5x RJ45, 0x SFP, 0x SFP+, 0x QSFP+, 0x SFP28, 0x QSFP28 | Number of PoE Ports: 4, PoE Standard: 802.3af/at Class 4 Type 2 PoE+ 30 Watts, PoE Budget: 120 W | Mounting: Desktop; DIN Rail; Wall | Long service life thanks to robust aluminum housing | Total power budget of up to 120 W for PSE | Plug & Play: No additional configuration required
Description
Teltonika Rail PoE+ Switch TSW100 5 Port
Industrial unmanaged PoE+ switch
The TSW100 is Teltonika Networks' first industrial unmanaged switch. Equipped with five Gigabit Ethernet ports, four of which support the IEEE 802.3af and IEEE 802.3at Power over Ethernet (PoE) standards. Classified as Power Source Equipment (PSE), it enables centralized power supply, delivers up to 30 watts per port, and reduces the effort required to install the power supply. It features 10/100/1000 Mbps Ethernet ports for a cost-effective, high-bandwidth solution. Ideal for professional high-bandwidth applications, providing both reliable data connections and the required power supply.
Power over Ethernet (PoE)
With Power over Ethernet, you can power compatible devices via the network cable. This reduces cabling effort, especially for end devices such as wireless access points, IP phones, and IP cameras, while also allowing greater flexibility when placing the devices.
802.3at PoE+
The IEEE 802.3at standard provides a maximum of 25.4 watts of power on each PoE+ port at a voltage of up to 50 volts. The standard assumes that 21.90 watts of usable power remain or may be consumed after line losses, so that the maximum power output is not exceeded. For PoE+, a Cat5e/6 cable with a maximum length of 100 m is recommended.














