Zyxel G.Fast Router XMG3927 with Wi-Fi
- VendorZyxel
Description
Zyxel G.Fast Router XMG3927 with Wi-Fi
G.fast Router with Dual-Band Wi-Fi, Swisscom-certified
The Zyxel XMG3927 is a router for fast connections of up to 500 Mbps on G.fast-capable copper lines. In the coming years, Swisscom will advance the network expansion with Fibre to the Street (FTTS). In this case, fibre optic cable is laid up to the building, and the last few meters are connected via conventional copper cable. FTTS is the ideal mix of high bandwidth and affordable network expansion. Currently, about a quarter of new DSL connections are being established on G.fast-capable lines. With the XMG3927, you are therefore perfectly equipped for modern G.fast installations.
Four Gigabit LAN Ports and Dual-Band Wi-Fi
The Zyxel XMG3927 comes with four Gigabit LAN ports to continue distributing the high bandwidths to the LAN. Wi-Fi is supported according to AC2400 with up to 1.7 Gbps on 5 GHz and up to 600 Mbps on 2.4 GHz. MU-MIMO and Beamforming enable high throughput even for time-critical applications. The seven internal Wi-Fi antennas enable good radio coverage. For this reason, the router is also housed in a standing enclosure.
Three Versions Available
Wi-Fi in a router brings security risks, and depending on the installation, this may not be desired. Therefore, the XMG3927 is available in the following three versions: Article 900856, router with Wi-Fi (this article), Article 900857, bridge without Wi-Fi, and Article 900858, router without Wi-Fi. Even after a reset or via the Wi-Fi button, Wi-Fi remains deactivated. Only the bridge variant reverts to a router without Wi-Fi upon a reset. The bridge is typically installed in front of a firewall.
Ready for Switzerland
In an extensive interoperability test, it was ensured that the Zyxel XMG3927 is compatible with G.fast, VDSL2, and vectoring on the Swisscom network. The router is pre-configured for use with the local providers and can thus be commissioned seamlessly. An installation guide in German, French, and Italian is also included in the delivery.
Requirements for In-Home Installation
G.fast operates in the frequency range up to 106 MHz, which is otherwise used for FM radio transmission. Accordingly, the requirements for the in-home installation are very high. Only twisted-pair cable should be used. Bridge tabs are also problematic; these are branches on the connection cable before the end device.
QoS (Quality of Service)
The QoS function of this device allows you to reserve bandwidth for specific devices or applications. By detecting application and device information as well as bandwidth requirements, it is guaranteed that highly prioritized data automatically receives the best possible connection. QoS also ensures that lower-priority applications, such as file downloads, never come to a complete standstill. This guarantees you reliable performance for important applications even during high network utilization.
Easy Connection via WPS Button
The system supports easy, automatic login via WPS (Wi-Fi Protected Setup). A simple button press is sufficient for setup: WPS-capable network devices then connect to each other automatically. The appropriate Wi-Fi settings are adopted, and the product is immediately ready for use.
Wi-Fi Standard 802.11ac (Wi-Fi 5)
The 802.11ac Wi-Fi standard offers you up to twice the data throughput of older standards. This increase is achieved by broadening the transmission bandwidth. In addition, with 802.11ac, the number of parallel data streams (Multiple Input Multiple Output, or MIMO) can be increased to up to eight MIMO streams, while the 802.11n standard defines a maximum of four MIMO streams. Even large data chunks such as videos and backups pose no problem with this Wi-Fi speed.
Multi-User MIMO/ MU-MIMO
As part of the Wave 2 development of the 802.11ac standard, Multi-User MIMO technology was introduced. By using Multi-User MIMO, this device can stream data to multiple devices simultaneously. This allows your Wi-Fi network to deliver faster throughput to every connected client. This means faster downloads and lag-free streaming for your devices.
Whether your DSL connection is already ready for G.fast can be found here: https://www.swisscom.ch/de/business/wholesale/angebot/anschluesse/BBCS.html Please note that when "RJ45 ports" and "WAN ports" are stated in the specifications, the total number of ports is not the sum of both. Some ports are flexibly configurable as LAN or WAN, which demonstrates the maximum configuration flexibility, not the number of separate ports. Please take this information into account when planning your network to ensure that your requirements for the number of ports and their configuration are met.
Specifications
- PoE In/Out:
- Nicht vorhanden
- PoE Budget:
- 0 W
- SFP Anschlüsse:
- 0
- SFP Geschwindigkeit:
- Keine SFP Ports
- USB 3.0 Anschlüsse:
- 1
- RJ-45 Anschlüsse:
- 4
- RJ-45 Geschwindigkeit:
- 10/100/1000 Mbit/s
- Anzahl PoE Ports:
- 0
- PoE Standard:
- Kein PoE
- WAN Anschlüsse:
- 1
- Anwendungsbereich:
- Gaming, Home
- WLAN on/off Schalter:
- Ja
- Modemtyp:
- ADSL/ADSL2+, G.Fast, VDSL/VDSL2+
- Zusatzfunktionen:
- IGMP Snooping, Quality of Service (QoS)
- Mobilfunk Standard:
- Nicht vorhanden
- Tiefe:
- 33 mm
- Breite:
- 175 mm
- Höhe:
- 220 mm
- MU-MIMO:
- Ja
- Basisanschluss:
- G.Fast
- Antennenanschluss:
- Kein externer Anschluss
- WLAN Standard:
- IEEE 802.11ac (Wi-Fi 5), IEEE 802.11b (Wi-Fi 2), IEEE 802.11g (Wi-Fi 3), IEEE 802.11n (Wi-Fi 4)
- Frequenzband:
- 2.4 GHz, 5 GHz
- WLAN Geschwindigkeit 2.4GHz:
- 600 Mbit/s
- WLAN Geschwindigkeit 5GHz:
- 1733 Mbit/s
- WLAN Geschwindigkeit Max.:
- 2333 Mbit/s
- WPS:
- Ja
- WLAN Verschlüsselung:
- WPA2-PSK (WPA2-Personal)
- Sicherheits Features:
- x
Zyxel G.Fast Router XMG3927 with Wi-Fi
- VendorZyxel
114.10
AC2400, dual-band Wi‑Fi with 1.7 Gbps 802.11ac 4x4 Wave 2 technology | Approved for use on the Swisscom network with vectoring | Basic connectivity: G.Fast, 1 WAN, 4 LAN | Excellent routing and QoS capabilities to prioritize applications as needed | NAT, SPI firewall and DoS protection for enhanced security
Description
Zyxel G.Fast Router XMG3927 with Wi-Fi
G.fast Router with Dual-Band Wi-Fi, Swisscom-certified
The Zyxel XMG3927 is a router for fast connections of up to 500 Mbps on G.fast-capable copper lines. In the coming years, Swisscom will advance the network expansion with Fibre to the Street (FTTS). In this case, fibre optic cable is laid up to the building, and the last few meters are connected via conventional copper cable. FTTS is the ideal mix of high bandwidth and affordable network expansion. Currently, about a quarter of new DSL connections are being established on G.fast-capable lines. With the XMG3927, you are therefore perfectly equipped for modern G.fast installations.
Four Gigabit LAN Ports and Dual-Band Wi-Fi
The Zyxel XMG3927 comes with four Gigabit LAN ports to continue distributing the high bandwidths to the LAN. Wi-Fi is supported according to AC2400 with up to 1.7 Gbps on 5 GHz and up to 600 Mbps on 2.4 GHz. MU-MIMO and Beamforming enable high throughput even for time-critical applications. The seven internal Wi-Fi antennas enable good radio coverage. For this reason, the router is also housed in a standing enclosure.
Three Versions Available
Wi-Fi in a router brings security risks, and depending on the installation, this may not be desired. Therefore, the XMG3927 is available in the following three versions: Article 900856, router with Wi-Fi (this article), Article 900857, bridge without Wi-Fi, and Article 900858, router without Wi-Fi. Even after a reset or via the Wi-Fi button, Wi-Fi remains deactivated. Only the bridge variant reverts to a router without Wi-Fi upon a reset. The bridge is typically installed in front of a firewall.
Ready for Switzerland
In an extensive interoperability test, it was ensured that the Zyxel XMG3927 is compatible with G.fast, VDSL2, and vectoring on the Swisscom network. The router is pre-configured for use with the local providers and can thus be commissioned seamlessly. An installation guide in German, French, and Italian is also included in the delivery.
Requirements for In-Home Installation
G.fast operates in the frequency range up to 106 MHz, which is otherwise used for FM radio transmission. Accordingly, the requirements for the in-home installation are very high. Only twisted-pair cable should be used. Bridge tabs are also problematic; these are branches on the connection cable before the end device.
QoS (Quality of Service)
The QoS function of this device allows you to reserve bandwidth for specific devices or applications. By detecting application and device information as well as bandwidth requirements, it is guaranteed that highly prioritized data automatically receives the best possible connection. QoS also ensures that lower-priority applications, such as file downloads, never come to a complete standstill. This guarantees you reliable performance for important applications even during high network utilization.
Easy Connection via WPS Button
The system supports easy, automatic login via WPS (Wi-Fi Protected Setup). A simple button press is sufficient for setup: WPS-capable network devices then connect to each other automatically. The appropriate Wi-Fi settings are adopted, and the product is immediately ready for use.
Wi-Fi Standard 802.11ac (Wi-Fi 5)
The 802.11ac Wi-Fi standard offers you up to twice the data throughput of older standards. This increase is achieved by broadening the transmission bandwidth. In addition, with 802.11ac, the number of parallel data streams (Multiple Input Multiple Output, or MIMO) can be increased to up to eight MIMO streams, while the 802.11n standard defines a maximum of four MIMO streams. Even large data chunks such as videos and backups pose no problem with this Wi-Fi speed.
Multi-User MIMO/ MU-MIMO
As part of the Wave 2 development of the 802.11ac standard, Multi-User MIMO technology was introduced. By using Multi-User MIMO, this device can stream data to multiple devices simultaneously. This allows your Wi-Fi network to deliver faster throughput to every connected client. This means faster downloads and lag-free streaming for your devices.
Whether your DSL connection is already ready for G.fast can be found here: https://www.swisscom.ch/de/business/wholesale/angebot/anschluesse/BBCS.html Please note that when "RJ45 ports" and "WAN ports" are stated in the specifications, the total number of ports is not the sum of both. Some ports are flexibly configurable as LAN or WAN, which demonstrates the maximum configuration flexibility, not the number of separate ports. Please take this information into account when planning your network to ensure that your requirements for the number of ports and their configuration are met.
